AEG Oven Error Codes

If your AEG oven is displaying an error code then it’s a sign that something is wrong with the machine. Error codes are designed to help engineers troubleshoot what is wrong with your appliance, however we’ll tell you exactly what they mean in this guide.

Error Code	Description
F0 – No Alarm Signal	Main control module of your appliance is failing to communicate with the alarm.
F1 – Door Not Locking	Check the door lock and the wiring connections.
F2 – Door Not Unlocking	Check the door lock and the wiring connections. Faulty thermostat reading could be preventing the door from unlocking.
F3 – Self Test Error	Turn off and unplug the appliance for 5 minutes, then turn it back on. If the error returns further investigation required.
F4 – Temperature Sensor Fault	Check temperature sensor and the wiring connections from the sensor to the control board.
F5 – Control Board Error	Faulty control board.
F7 – Mains Supply Issue	Appliance has detected an issue with the incoming power. Check appliance has been wired in correctly.
F8 – Power Supply to Module Issue	Main control board not receiving correct power. Check wiring and connections.
F9 – Processor Auto Resetting	Turn off and unplug the appliance for 5 minutes, then turn it back on. If the error returns further investigation required.

We hope the definition of these error codes will be helpful to you.

If you require an engineer, you can book an oven repair by clicking here.