There are several reasons why your washing machine may not be filling. Here are the most common culprits and how to fix them.

1. Check the Water Supply

Before assuming the worst, make sure your home’s water supply is working.

Quick Fix:

• Check that the taps supplying your washer are fully open.
• Try turning on a nearby sink to confirm water is flowing in your home.
• If the supply is cut off, wait for it to be restored before running a wash cycle.

2. Inspect the Inlet Hoses

Blocked or kinked hoses can stop water from reaching your machine.

Quick Fix:

• Turn off the water supply and unplug the machine.
• Inspect the hoses for twists, bends, or leaks.
• If blocked, remove them and clean out any debris before reconnecting.

3. Clean the Water Inlet Filters

Small filters inside the inlet valves can get clogged with dirt or limescale, restricting water flow.

Quick Fix:

• Turn off the water and unplug the machine.
• Remove the hoses and locate the small mesh filters inside the inlet valves.
• Clean them with a soft brush and rinse under running water before reinserting.

4. Test the Water Inlet Valve

The water inlet valve controls how much water enters the machine. If it’s faulty, your washer won’t fill.

Quick Fix:

• Listen for a humming sound when the machine tries to fill—if silent, the valve may be faulty.
• If cleaning the filters doesn’t help, the valve may need replacing.

5. Check the Door or Lid Switch

Most washing machines won’t fill if the door or lid isn’t securely closed.

Quick Fix:

• Make sure the door clicks shut properly.
• If the latch is loose or broken, it may need replacing.

6. Inspect the Pressure Switch

The pressure switch tells your machine when to stop filling. If it’s faulty, it may prevent filling altogether.

Quick Fix:

• Locate the pressure switch (usually inside the control panel).
• Check for a blocked pressure hose and clean it if necessary.